Semi low-loader
New
NOOTEBOOM MCO-48-03V(V) Semi low-loader
- Vehicle Nr.
- C022595
- Model
- MCO-48-03V(V)
- Axles
- 3
- Suspension
- Air
- Steering system
- Hydraulic
MCO(S) semi low-loader
Do you regularly transport heavy machinery or exceptional loads over challenging routes? The Nooteboom MCO(S) combines excellent manoeuvrability, high payload capacity and low operating costs. Thanks to its hydraulic steering system, you can transport heavy machinery, construction equipment, industrial components and exceptional loads efficiently and safely, even in difficult-to-access locations.
Semi low-loader
- Nr of Axles 2 to 8
- Steering hydraulic
- Suspension Air or hydraulic
- Axle load 10 or 12 t/axle
Maximum manoeuvrability and flexibility
The hydraulic steering system of the MCO(S) provides a large steering angle, minimal tyre wear and optimal control during every transport operation. As a result, you benefit from higher transport efficiency and lower operating costs. Whether you choose the extensive customization options of the MCO from the PRO programme or the smart simplicity of the MCOS from the SMART programme, you will always have a reliable semi low-loader that can be fully tailored to your transport operations.
Developed for every transport challenge
The MCO offers extensive configuration options for heavy transport, special transport and exceptional haulage. Thanks to the choice of fixed, single-, double- or triple-extendable loadingbeds, you can easily transport both compact machinery and long, heavy loads. In addition, special versions are available, such as a V-shape loadingbed for wind turbine towers and the OptiCat version for machinery transport in France.
Nooteboom MCOS takes corner
Smart design low operating costs
The hydraulically steered axles ensure optimal tracking and exceptional manoeuvrability. This allows you to manoeuvre more easily on construction sites, industrial premises and other locations where space is limited. At the same time, tyre wear is significantly reduced, directly contributing to lower operating costs. Thanks to its low tare weight, you also benefit from a high payload capacity, both for transport within legal limits and for transport under special permit.
Built for long-term performance
The MCO(S) is manufactured according to the highest quality standards and equipped with premium A-brand components. The chassis is fully metallised for optimum corrosion protection and a long service life. As a result, you benefit from maximum reliability, low maintenance costs and high residual value.
The smart choice for heavy and exceptional transport
Do you want to transport heavy machinery, construction equipment, aerial work platforms or industrial components efficiently? With the Nooteboom MCO(S), you choose a hydraulically steered semi low-loader that combines maximum flexibility, excellent manoeuvrability and high profitability in a single transport solution.
Fully tailored to your transport requirements
Depending on the configuration, the MCO(S) is available with:
- 2 to 8 hydraulically steered axles
- Manual steering with remote control
- Fixed or hydraulically movable gooseneck
- Fixed, single-, double- or triple-extendable loadingbed
- Air suspension or hydropneumatic suspension with lift/lower function
- Loadingbed heights from approximately 780 mm
- Technical axle loads up to 12 tonnes per axle at 80 km/h
- SAF or BPW axles
- Various axle distances and loadingbed widths
- Extensive range of loading ramps, excavator throughs and customization options
MCO semi low-loaders
Application-oriented
Nooteboom can adapt the MCO semi low-loader to meet the specific requirements of the customer to be perfectly suited for specific applications. In addition there are special versions within the MCO programme, such as a V-shaped load floor for the transport of windmill tower sections and the OptiCat semi low-loader, optimised for the transport of machinery in France.
The MCO semi low-loader is available with among other things
- 2 to 8 axles with hydraulic steering
- Manual steering with remote control
- Gooseneck fixed or hydraulically adjustable
- Fixed or single/double/triple extendible load floor
- Air suspension or hydropneumatic suspension with raise/lower function
- Loaded floor height in drive position of approx. 780mm, with tyres 205/65R17.5 and a technical axle load of 8t/axle at 80 km/h
- Loaded floor height in drive position of approx. 880mm, with tyres 235/75R17.5 or 245/70R17.5 and a technical axle load of 10t/axle or 12t/axle at 80 km/h
- Loaded floor height in drive position of approx. 980mm, with tyres 285/70R19.5 and a technical axle load of 12t/axle at 80 km/h
- SAF axles or BPW axles
- Axle distance 1360mm, 1510mm or 1810mm
- Load floor width 2520mm or 2740mm
- A wide range of ramps for different applications – with a low angle of inclination and seamless connection to the load floor
- Various application-oriented options, such as an excavator trough and made-to-order
MCOS semi low-loaders
The MCOS semi low-loader is the smart choice for those seeking precision steering without compromising on ease of use, reliability, or cost control.
- Hydraulic steering, made simple: The robust steering system with 45° steering angle ensures maximum maneuverability and minimal tire wear.
- High payload capacity: Thanks to the low tare weight, there’s ample room for cargo—within legal limits and for permit-based transport.
- Accessible to every transporter: The MCOS makes hydraulic steering available to a broad group of operators, without complexity or high entry costs.
- Built for profitability: Attractive purchase price, low maintenance costs, and durable finish (fully hot zinc-sprayed chassis) make this a lasting investment.
Available to everyone
Many thousands of Nooteboom SMART semi low-loaders are by now being used for the transport of construction machinery, access platforms, road construction equipment, agricultural machinery and crane-loaded goods. With the Nooteboom MCOS a semi low-loader with hydraulic steering is now within easy reach of even more transport operators. The MCOS semi low-loaders are extremely user-friendly and offer increased transport efficiency.
Smart investment
The MCOS semi low-loaders have an excellent price/quality ratio thanks to the broad, market-oriented concept and sophisticated production method. The finish and conservation are of a particularly high quality, the chassis being fully hot zinc sprayed. Durability, low maintenance costs and a competitive purchase price ensure that the MCOS semi low-loader is an excellent investment.
The MCOS semi low-loader is available with among other things:
- 3 or 4 axles
- The rearmost 2, 3 or 4 axles with hydraulic steering
- Manual steering with remote control
- Thin but extremely strong gooseneck
- Fixed or single extendible load floor
- Air suspension with raise/lower function
- Technical axle load of 9t/axle or 10t/axle at 80 km/h
- SAF axles
- Tyres 235/75R17.5 or 245/70R17.5
- Axle distance 1360mm
- Load floor width 2520mm
- Loaded floor height approx. 860mm in drive position
- Sliding width enlargers
- Load floor from hardwood or galvanised steel grate
- A wide range of ramps for different applications – with a low angle of inclination and seamless connection to the load floor
- Choice of various storage boxes
- Winch with remote control and accessories.
Some of our available trailers
